ulp-enabled
|
string
|
Shows true to indicate that the system is using Unified LUN Presentation, which can expose all LUNs through all host ports on both controllers. The interconnect information is managed in the controller firmware. ULP appears to the host as an active-active storage system where the host can choose any available path to access a LUN regardless of disk group ownership. When ULP is in use, the system's operating/cache-redundancy mode is shown as Active- Active ULP. ULP uses the T10 Technical Committee of INCITS Asymmetric Logical Unit Access (ALUA) extensions, in SPC-3, to negotiate paths with aware host systems. Unaware host systems see all paths as being equal.
|
profiles-enabled
|
string
|
Shows whether host profiles are enabled.
- true: Host profiles are enabled.
-
false: Host profiles are disabled.
|
max-ports
|
uint32
|
Number of host-interface ports in the controller enclosure.
|
max-drives
|
uint32
|
Number of disks that the system supports.
|
max-volumes
|
uint32
|
Number of volumes that the system supports.
|
max-vdisks
|
uint32
|
Number of linear disk groups that the system supports.
|
max-luns
|
uint32
|
Number of LUNs that the system supports.
|
max-owned-arrays-per-controller
|
uint32
|
Number of linear disk groups that each controller supports.
|
max-storage-pools-per-controller
|
uint32
|
The number of virtual pools that each controller supports.
|
max-components-per-storage-pool
|
uint32
|
The number of virtual pools that each pool can contain.
|
max-storage-pool- size
|
string
|
The maximum size of a virtual pool.
|
max-storage-pool- size-numeric
|
uint64
|
Unformatted
max-storage-pool-size value in blocks.
|
max-capi-arrays
|
uint32
|
Same as
max-vdisks .
|
max-chunk-size
|
uint32
|
Maximum chunk size for disk groups.
|
min-chunk-size
|
uint32
|
Minimum chunk size for disk groups.
|
physical-position-offset
|
uint32
|
Starting index for physical components (enclosures, disks, etc.) in the storage system.
|
backoff-percentage
|
uint32
|
Percentage of disk capacity that is reserved to compensate for minor capacity differences between disk drives so they can be used interchangeably. This is not settable by users.
|
vdisk-metadata-size-perdisk-blocks
|
uint32
|
Amount of space reserved on a disk for metadata, in blocks.
|
vdisk-metadata-size-blocks
|
uint32
|
Amount of metadata, in blocks, stored on each disk.
|
max-host-groups
|
uint32
|
The number of host groups that the system supports.
|
max-hosts-per-host-group
|
uint32
|
The maximum number of hosts that a host group can contain.
|
max-initiator
|
uint32
|
The maximum number of initiators that a host can contain.
|
max-volume-groups-per-controller
|
uint32
|
The maximum number of volume groups that each controller supports.
|
max-volumes-per-volume-group
|
uint32
|
The maximum number of volumes that a volume group can contain.
|
max-replication-sets
|
uint32
|
Number of replication sets that the system supports.
|
max-enclosures
|
uint32
|
Number of enclosures that the system supports.
|
local-controller
|
string
|
The ID of the controller you are accessing.
- A: Controller A.
- B: Controller B.
|
local-controller-numeric
|
uint32
|
Numeric equivalents for
local-controller values.
|
serial-number
|
string
|
Last six digits of the midplane serial number.
|
external-targetid-control
|
string
|
Not used.
|
external-targetid-control-numeric
|
uint32
|
Not used.
|
lan-heartbeat
|
string
|
Not used.
|
lan-heartbeat-numeric
|
uint32
|
Not used.
|
ip-address-mode
|
string
|
- CAPI_TWO_IP_ADDRESSES_MODE: Dual controller system has a unique IP address for each controller.
- CAPI_ONE_IP_ADDRESS_MODE: Dual controller system has the same IP address for both controllers, only one active at a time.
|
ip-address-mode-numeric
|
uint32
|
Numeric equivalents for
lan-heartbeat values.
- 0: CAPI_TWO_IP_ADDRESSES_MODE
-
1: CAPI_ONE_IP_ADDRESS_MODE
|
debug-flags
|
uint32
|
For use by service personnel.
|
enclosure-flags
|
uint32
|
For internal use only.
|
num-global-spares
|
uint32
|
Number of global-spare disks defined in the storage system.
|
dynamic-spare-rescan-rate
|
uint32
|
Interval at which the system is scanned for disks automatically designated as spares, if the dynamic spares feature is enabled.
|
performance-tuning-flags
|
string
|
For internal use only.
|
performance-tuning-flags- numeric
|
uint32
|
Numeric equivalents for
performance-tuning values.
|
min-backing-store-size
|
uint32
|
Not applicable.
|
max-task-retention-count
|
uint32
|
Maximum retention count for a task that creates snapshots or replication volumes.
|
max-fc-speed
|
string
|
Maximum FC host-port speed.
|
max-fc-speed-numeric
|
uint32
|
Numeric equivalent for the
max-fc-speed value.
|
max-iscsi-speed
|
string
|
Maximum iSCSI host-port speed.
|
max-iscsi-speed-numeric
|
uint32
|
Numeric equivalent for the
max-iscsi-speed value.
|
max-peers-allowed
|
uint32
|
The maximum number of peer connections that the system supports.
|
peers-in-use-count
|
uint32
|
The number of peer connections present in the system.
|
max-ar-vols-allowed
|
uint32
|
The maximum number of virtual replication volumes that the system supports.
|
ar-sets-in-use-count
|
uint32
|
The number of virtual replication volumes present in the system.
|
linear-replication-configured
|
string
|
Not applicable.
|
linear-replication-configured-numeric
|
uint32
|
Not applicable.
|
virtual-replication-configured
|
string
|
- False: No virtual replication sets exist on the system.
- True: At least one virtual replication set exists on the system.
|
virtual-replication-configured-numeric
|
uint32
|
Numeric equivalents for
virtual-replication-configured values.
|
max-adapt-drives-per-disk-group
|
uint32
|
The maximum number of disks that an ADAPT disk group can contain.
|
min-adapt-drives-per-disk-group
|
uint32
|
The minimum number of disks that an ADAPT disk group can contain.
|
max-adapt-disk-groups-per-system
|
uint32
|
The maximum number of ADAPT disk groups that the system supports.
|
max-adapt-drives-per-expansion
|
uint32
|
The maximum number of disks by which an ADAPT disk group can be expanded.
|