Dell PowerVault ME4 Series Storage System CLI Guide

PDF

adapt-expand-preview

Table 1. adapt-expand-preview propertiesThis basetype is used by add storage.
Name	Type	Description
name	string	The name of the disk group.
serial-number	string	Disk group serial number.
pool	string	The name of the pool that contains the disk group.
pool-serial-number	string	The serial number of the pool that contains the disk group.
type	string	Disk description. SAS: Enterprise SAS spinning disk. SAS MDL: Midline SAS spinning disk. SSD SAS: SAS solid-state disk.
type-numeric	uint32	Numeric equivalents for type values. 4: SAS 8: SSD SAS 11: SAS MDL
size	string	Disk group capacity, formatted to use the current base, precision, and units.
size-numeric	uint64	Unformatted size value in blocks.
raidtype	string	The RAID level of the disk group. NRAID RAID0 RAID1 RAID3 RAID5 RAID6 RAID10 RAID50 ADAPT
raidtype-numeric	unit32	Numeric equivalents for raidtype values 0: RAID0 1: RAID1 2: ADAPT 3: RAID3 5: RAID5 6: NRAID 8: RAID50 10: RAID10 11: RAID6 .
tier	string	Archive: The disk group is in the lowest storage tier, which uses midline spinning SAS disks (<10k RPM, high capacity). Performance: The disk group is in the highest storage tier, which uses SSDs (high speed). Read Cache: The disk is an SSD providing high-speed read cache for a storage pool. Standard: The disk group is in the storage tier that uses enterprise-class spinning SAS disks (10k/15k RPM, higher capacity).
tier-numeric	uint32	Numeric equivalents for storage-tier values. 0: N/A 1: Performance 2: Standard 4: Archive 8: Read Cache
enclosure-id	string	Enclosure ID.
disk-count	uint32	Number of disks in the disk group.
disk-display	string	The disks that would be used, listed as hyphenated disk ranges where possible to aid readability (e.g., 1.1-12,...). If the list exceeds 60 characters, see the full list shown by disk-display-full.
disk-display-full	string	The disks that would be used, listed individually (e.g., 1.1,1.2,...).