Dell PowerVault ME4 Series Storage System CLI Guide

show ipv6-addresses


Description	Shows static IPv6 addresses assigned to each controller's network port.
Minimum role	monitor
Syntax	show ipv6-addresses [controller a\|b\|both]
Parameters	controller a\|b\|both Optional. Specifies whether to show addresses for controller A, controller B, or both. If this parameter is omitted, information is shown for both controllers.
Output	Ctlr The controller ID: A or B. Index The controller's index value for the address. The index is automatically assigned when adding a static IPv6 address. Label The name assigned to the address, or ‘-’ if the address is unnamed. Address The IPv6 address with prefix length.
Examples	Show static IPv6 addresses assigned to controller A. # show ipv6-addresses controller a
Base types	ipv6-network-parameters status
See also	add ipv6-address remove ipv6-address set ipv6-network-parameters show ipv6-network-parameters