Any task type, no detail
Name
The name of the task.
Type
The task type.
Status
The task status. Status values for each task type are listed in the following sections.
State
The current step of the task. State values for each task type are listed in the following sections.
Error Message
- If an error occurred while processing the task, the error message.
- Blank if no error has occurred.
TakeSnapshot task, detail
Task Name
The name of the task.
Task Type
TakeSnapshot
Status
- Uninitialized: The task is not yet ready to run.
- Ready: The task is ready to run.
- Active: The task is running.
- Error: The task has an error.
- Complete: For a TakeSnapshot task only, the task is complete but not yet ready to run again.
- Deleted: The task is expired but this state is not yet synchronized to the partner controller.
Task State
The current step of the task:
- Start
- VerifyVolume
- CreateName
- CreateSnap
- VerifySnap
- InspectRetention
- FindOldestSnap
- UnmapSnap
- ResetSnap
- RenameSnap
Error Message
- If an error occurred while processing the task, the error message.
- Blank if no error has occurred.
Source Volume
The name of the source volume.
Source Volume Serial
The serial number of the source volume.
Prefix
The label that identifies snapshots created by this task.
Retention Count
The number of snapshots to retain with this prefix. When a new snapshot exceeds this limit, the oldest snapshot with the same prefix is deleted.
Last Created
- The name of the last snapshot created by the task.
- Blank if the task has not taken a snapshot.
Snapshot Name
- The name of each snapshot taken.
- Blank if the task has not taken a snapshot.
Snapshot Serial
- The serial number of each snapshot taken.
- Blank if the task has not taken a snapshot.
ResetSnapshot task, detail
Task Name
The name of the task.
Task Type
TakeSnapshot
ResetSnapshot
Status
- Uninitialized: The task is not yet ready to run.
- Ready: The task is ready to run.
- Active: The task is running.
- Error: The task has an error.
- Deleted: The task is expired but this state is not yet synchronized to the partner controller.
Task State
The current step of the task:
- Start
- VerifySnap
- UnmapSnap
- ResetSnap
Error Message
- If an error occurred while processing the task, the error message.
- Blank if no error has occurred.
Snapshot Name
The name of the snapshot to reset.
Snapshot Serial Number
The serial number of the snapshot to reset.
VolumeCopy task, detail
Task Name
The name of the task.
Task Type
VolumeCopy
Status
- Uninitialized: The task is not yet ready to run.
- Ready: The task is ready to run.
- Active: The task is running.
- Error: The task has an error.
- Deleted: The task is expired but this state is not yet synchronized to the partner controller.
Task State
The current step of the task:
- Start
- VerifyVolume
- CreateName
- ObtainMap
- UnmapVolume
- CreateVolume
- RemapVolume
- VerifyCreatedVolume
Error Message
- If an error occurred while processing the task, the error message.
- Blank if no error has occurred.
Source Volume
The name of the volume to be copied.
Source Volume Serial
The serial number of the volume to be copied.
Destination Pool
The name of the pool in which the new volume will be created.
Destination Pool Serial
The serial number of the destination pool.
Prefix
The label that identifies copies created by this task.
Modified Data
- modified: The copy includes modified snapshot data.
- preserved: The copy excludes modified snapshot data
Last Created
- The name of the last volume created by the task.
- Blank if the task has not created a volume.
Replicate task, detail
Task Name
The name of the task.
Task Type
Replicate
Status
- Uninitialized: The task is not yet ready to run.
- Ready: The task is ready to run.
- Active: The task is running.
- Error: The task has an error.
- Deleted: The task is expired but this state is not yet synchronized to the partner controller.
Task State
The current step of the task:
- Idle
- Replicate
- VerifyRunning
Error Message
- If an error occurred while processing the task, the error message.
- Blank if no error has occurred.
EnableDSD task, detail
Task Name
The name of the task.
Task Type
EnableDSD
Status
- Uninitialized: The task is not yet ready to run.
- Ready: The task is ready to run.
- Active: The task is running.
- Error: The task has an error.
- Deleted: The task is expired but this state is not yet synchronized to the partner controller.
Task State
The current step of the task, which is always
Start.
Error Message
- If an error occurred while processing the task, the error message.
- Blank if no error has occurred.
DisableDSD task, detail
Task Name
The name of the task.
Task Type
DisableDSD
Status
- Uninitialized: The task is not yet ready to run.
- Ready: The task is ready to run.
- Active: The task is running.
- Error: The task has an error.
- Deleted: The task is expired but this state is not yet synchronized to the partner controller.
Task State
The current step of the task, which is always Start.
Error Message
- If an error occurred while processing the task, the error message.
- Blank if no error has occurred.
|