Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Precision 7960 Tower Service Manual

Installing the wireless card

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following images indicate the location of the wireless card and provide a visual representation of the installation procedure.

Installing the wireless card

Steps

  1. Align and slide the PCIe riser card into the expansion-card slot on the system board.
  2. Connect the PCIe riser-card cable to the connector on system board.
  3. Route the PCIe riser-card cable through the hook on the chassis.
  4. Close the PCIe door.

Next steps

  1. Install the air shroud.
  2. Install the left-side cover.
  3. Follow the procedure in After working inside your computer.

  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\