Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell EMC SmartFabric OS10 User Guide Release 10.5.0

PDF

ip dhcp snooping binding

Create a static DHCP snooping binding entry in the DHCP binding table.

Syntax
ip dhcp snooping binding mac address vlan vlan-id ip ip-address interface [ethernet slot/port/sub-port | port-channel port-channel-id | VLTi]
Parameters
  • mac address—Enter the MAC address of the host to which the server is leasing the IP address.
  • vlan vlan-id—Enter the VLAN ID of the VLAN the host belongs to. The range is from 1 to 4093.
  • ip ip-address—Enter the IP address of the host.
  • interface interface-type—Enter the interface type information.
Defaults
None
Command Mode
CONFIGURATION
Usage Information

When you create a static DHCP snooping entry, it does not time out.

Before creating a static entry for a VLAN, create the VLAN. If you do not create a VLAN before creating a static entry, the system displays an error message.

Before deleting a port-channel or VLAN, remove any associated DHCP snooping entries.

This command is accessible to users with sysadmin and secadmin roles.

The no version of this command deletes the static entry from the DHCP snooping binding table.

Example 
OS10(config)# ip dhcp snooping binding mac 00:04:96:70:8a:12 vlan 100 ip 100.1.1.2 interface ethernet 1/1/4
Supported Releases
10.5.0 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\