Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell EMC SmartFabric OS10 User Guide Release 10.5.0

show mac address-table count virtual-network

Displays the number of MAC addresses learned on virtual networks.

Syntax
show mac address-table count virtual-network [dynamic | local | remote | static | interface {ethernet node/slot/port:subport | port-channel number} | vn-id]
Parameters
dynamic
Display the number of local dynamically-learned MAC addresses.
local
Display the number of local MAC addresses.
remote
Display the number of MAC addresses learned from remote VTEPs.
static
Display the number of local statically-configured MAC addresses.
interface ethernet node/slot/port[:subport]
Display the number of MAC addresses learned on the specified interface.
interface port-channel number
Display the number of MAC addresses learned on the specified port channel.
vn-id
Display the number of MAC addresses learned on the specified virtual network, from 1 to 65535.
Default
Not configured
Command mode
EXEC
Usage information
Use this command to display the number of MAC address entries learned on virtual networks in the MAC address table.
Example
OS10# show mac address-table count virtual-network 
MAC Entries for all vlans :
Dynamic Address Count :                  8
Static Address (User-defined) Count :    0
Total MAC Addresses in Use:              8
Supported releases
10.4.2.0 or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\