Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Dell EMC SmartFabric OS10 User Guide Release 10.5.0

PDF

show ip bgp flap-statistics

Displays BGP flap statistics on BGP routes.

Syntax
show ip bgp [vrf vrf-name] flap-statistics
Parameters
None
Default
Not configured
Command Mode
EXEC
Usage Information
  • vrf vrf-name — (OPTIONAL) Enter vrf and then the name of the VRF to view flap statistics on BGP routes corresponding to that VRF.
  • Network — Displays the network ID where the route is flapping.
  • From — Displays the IP address of the neighbor advertising the flapping route.
  • Duration — Displays the HH:MM:SS after the route first flapped.
  • Flaps — Displays the number of times the route flapped.
  • Reuse — Displays the HH:MM:SS until the flapped route is available.
  • Path — Lists all AS the flapping route passed through to reach the destination network.
Example
OS10# show ip bgp flap-statistics
BGP local router ID is 80.1.1.1
Status codes: s suppressed, S stale, d dampened, h history, * valid, > best
Origin codes: i - IGP, e - EGP, ? - incomplete
     Network      From       Flaps  Duration  Reuse      Path           
*>   3.1.2.0/24   80.1.1.2   1      00:00:11  00:00:00   800 9 8 i
*>   3.1.3.0/24   80.1.1.2   1      00:00:11  00:00:00   800 9 8 i
*>   3.1.4.0/24   80.1.1.2   1      00:00:11  00:00:00   800 9 8 i
*>   3.1.5.0/24   80.1.1.2   1      00:00:11  00:00:00   800 9 8 i
*>   3.1.6.0/24   80.1.1.2   1      00:00:11  00:00:00   800 9 8 i
Total number of prefixes: 5
Supported Releases
10.3.0E or later

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\