Alienware Command Center 6.x User's Guide

Configure DPI and polling rates

1. Select the Pro mouse under ALIENFX.
2. Go to Setting > DPI.
3. Configure the DPI and Polling rates for the device.
   The default DPI levels from one to five indicated on the slider are:

   • 400
   • 800—Default
   • 1200
   • 1600
   • 2400

   The default polling rate options are:

   • 125
   • 250
   • 500
   • 1000
   • 2000
   NOTE:The 8K Hz option is enabled only for wired connections.
4. Click Save Preset.
   NOTE:If you switch your Pro mouse from wired to a wireless connection and the polling rate is set higher than 4000 Hz, the polling rate is reduced to 4000 Hz and a message is displayed.