Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products

Latitude 3190 2-in-1 Owner’s Manual

Before working inside your computer

  1. Ensure that your work surface is flat and clean to prevent the computer cover from being scratched.
  2. Turn off your computer.
  3. If the computer is connected to a docking device (docked), undock it.
  4. Disconnect all network cables from the computer (if available).
    CAUTION If your computer has an RJ45 port, disconnect the network cable by first unplugging the cable from your computer.
  5. Disconnect your computer and all attached devices from their electrical outlets.
  6. Open the display.
  7. Press and hold the power button for few seconds, to ground the system board.
    CAUTION To guard against electrical shock unplug your computer from the electrical outlet before performing Step # 8.
    CAUTION To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface at the same time as touching a connector on the back of the computer.
  8. Remove any installed ExpressCards or Smart Cards from the appropriate slots.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\