Latitude 3190 2-in-1 Owner’s Manual

Installing display assembly

1. Place the display assembly to align with the screw holders on the computer at 90 degree with keyboard facing the table.
2. Replace the six M2.5x5 screws that secure the display hinges to the palm-rest assembly.
3. Flip over the computer.
4. Connect the display cable to the connector on the system board.
5. Place the display cable bracket over the display cable connector, and replace the M2x3 screws to secure the display cable to the computer.
6. Connect the WLAN cables.
7. Place the metal bracket on WLAN card, and replace the M2x3 screw to secure the metal bracket on the system board.
8. Install the:
   1. battery
   2. base cover
9. Follow the procedure in After working inside your computer.