Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Dell Financial Services Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell PowerEdge T360 Installation and Service Manual

PDF

Cable routing

Figure 1. 8 x 3.5-inch drive system
This image shows Cable routing - 8 x 3.5-inch drive backplane
Table 1. Connector descriptions for 8 x 3.5-inch drive systemThis table describes the cabling for 8 x 3.5-inch drive backplane.
From To
CTRL_SRC_SA1 (backplane controller connector on system board) BP_DST_SA1 (backplane signal connector)
BOSS_PWR (BOSS N1 module power connector on system board) PWR_1 (BOSS N1 module power connector)
SL2_PCH_PA2 (signal connector on system board) PCIe_1 (BOSS N1 module signal connector)
SATA_ODD (optical disc drive SATA connector on system board) and HDD/ODD_PWR (optical disk drive power connector on system board) ODD (optical disc drive connector)
FP_USB (front USB connector on system board) and CTRL_PNL (control panel connector on system board) FIO (control panel connector)
Figure 2. Cable routing - 4 x 3.5-inch drive system
This image shows Cable routing - 4 x 3.5-inch drive system
Table 2. Connector descriptions for 4 x 3.5-inch drive systemThis table describes the cabling for 4 x 3.5-inch drive backplane.
From To
SL1_PCH_SA1 (backplane signal connector on system board) BP_DST_SA1 (backplane signal connector)
BOSS_PWR (BOSS N1 module power connector on system board) PWR_1 (BOSS N1 module power connector)
SL2_PCH_PA2 (signal connector on system board) PCIe_1 (BOSS N1 module signal connector)
SATA_ODD (optical disc drive SATA connector on system board) and HDD/ODD_PWR (optical disk drive power connector on system board) ODD (optical disc drive connector)
FP_USB (front USB connector on system board) and CTRL_PNL (control panel connector on system board) FIO (control panel connector)
Figure 3. Cable routing - redundant PSU
This image shows Cable routing - redundant PSU
Table 3. Connector descriptions for redundant PSUThis table describes the cabling for redundant PSU.
From To
SYS (system power connector on power interposer board) P1 (system power connector on system board)
CPU (processor power connector on power interposer board) P2 (processor power connector on system board)
SIG_PWR_1 (backplane power connector on power interposer board) BP_PWR_1 (backplane power connector)
PIB_SIG_1 (power interposer board signal connector) PIB (Power interposer board connector on system board)
Figure 4. Cable routing - cabled PSU
This image shows Cable routing - cabled PSU
Table 4. Connector descriptions for cabled PSUThis table describes the cabling for cable PSU.
From To
Power cables from the PSU P1 (system power connector on system board)
P2 (processor power connector on system board)
P3 ( power event connector on system board)
BP_PWR_1 (backplane power connector)
PIB (Power interposer board connector on system board)

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\