Dell PowerVault ME4 Series Storage System CLI Guide

fc-port

This basetype is used by show ports for a Fibre Channel port.

Table 1. fc-port properties
Name	Type	Description
configured-topology	string	Configured topology. Loop : Fibre Channel arbitrated loop (public or private). PTP : Fibre Channel point-to-point. Auto : Loop preferred, otherwise point-to-point, based on the detected connection type.
configured-topology-numeric	uint32	Numeric equivalents for configured-topology values. 0: Loop 1 : PTP 2: Auto
primary-loop-id	string	If the port is using loop topology and the port status is Up, this field shows the primary loop ID. If the port is not using loop topology or the port status is not Up, this field shows N/A.
sfp-status	string	SFP status. OK Not present : No SFP is inserted in this port. Not compatible : The SFP in this port is not qualified for use in this system. When this condition is detected, event 464 is logged. Incorrect protocol : The SFP protocol does not match the port protocol. When this condition is detected, event 464 is logged.
sfp-status-numeric	uint32	Numeric equivalents for sfp-status values. 0 : Not compatible 1 : Incorrect protocol 2 : Not present 3 : OK
sfp-present	string	Shows whether the port contains an SFP. Not Present Present
sfp-present-numeric	uint32	Numeric equivalents for sfp-present values. 0: Not Present 1: Present
sfp-vendor	string	The SFP vendor.
sfp-part-number	string	The SFP part number.
sfp-revision	string	The SFP revision.
sfp-supported-speeds	string	The link speeds that the SFP supports.
sfp-supported-speeds-numeric	uint32	Numeric equivalents for sfp-supported-speeds values.