Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerVault ME4 Series Storage System CLI Guide

PDF

iscsi-port

This basetype is used by show ports for an iSCSI host port.

Table 1. iscsi-port properties
Name Type Description
ip-version string iSCSI IP version.
  • IPv4: iSCSI host port addresses use IPv4 format.
  • IPv6: iSCSI host port addresses use IPv6 format.
ip-address string Assigned port IP address.
gateway string For IPv4, gateway IP address for assigned IP address.
netmask string For IPv4, subnet mask for assigned IP address.
default-router string For IPv6, default router for the assigned IP address.
link-local-address string For IPv6, the link-local address that is automatically generated from the MAC address and assigned to the port.
mac-address string Unique Media Access Control (MAC) hardware address, also called the physical address.
sfp-status string SFP status.
  • OK
  • Not present: No SFP is inserted in this port.
  • Not compatible: The SFP in this port is not qualified for use in this system. When this condition is detected, event 464 is logged.
  • Incorrect protocol: The SFP protocol does not match the port protocol. When this condition is detected, event 464 is logged.
sfp-status-numeric uint32 Numeric equivalents for sfp-status values.
  • 0: Not compatible
  • 1: Incorrect protocol
  • 2: Not present
  • 3: OK
sfp-present string Shows whether the port contains an SFP.
  • Not Present
  • Present
sfp-present-numeric uint32 Numeric equivalents for sfp-present values.
  • 0: Not Present
  • 1: Present
sfp-vendor string The SFP vendor.
sfp-part-number string The SFP part number.
sfp-revision string The SFP revision.
sfp-10G-compliance string The 10G compliance code of the SFP, if supported, or No Support.
sfp-10G-compliance-numeric uint32 Numeric equivalents of sfp-10G-compliance values.
sfp-ethernet-compliance string The Ethernet compliance code of the SFP, if supported, or No Support.
sfp-ethernet-compliance-numeric uint32 Numeric equivalents of sfp-ethernet-compliance values.
sfp-cable-technology string Shows whether the SFP supports active or passive cable technology.
sfp-cable-technology-numeric uint32 Numeric equivalents of sfp-cable-technology values.
sfp-cable-length uint8 The link length (in meters) that is supported by the SFP while operating in compliance with applicable standards for the cable type.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\