Zu den Hauptinhalten

Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

PDF

Deleting Virtual Disks

The following table lists the RAIDCFG options, parameters, and pre-defined arguments for deleting virtual disks.

Table 1. Deleting Virtual Disks
Mandatory Options and Arguments	Optional Parameters	Valid Parameters Arguments	Description
`-vd -ac=dvd` `- c=id` or `vdisk action=deletevdisk` `controllerid=id`	NA	NA	Deletes all virtual disks on the indicated controller. This option combination is mandatory. Example: A:>raidcfg -vd -ac=dvd -c=2 RAIDCFG Command successful!
`-vd -ac=dvd` `- c=id` or `vdisk action=deletevdisk` `controllerid=id`	`-vd or vdisk`	`< valid virtual disk ID number>`	Deletes the indicated virtual disk on the indicated controller. The `-vd- ac=dvd -c =id` option combination is mandatory. The second `-vd` option is optional and can be added to the command line in any order after the mandatory option. Example: A:>raidcfg -vd -ac=dvd -c=2 -vd=0 RAIDCFG Command successful!

NOTE: When virtual disks are created, the RAID controller starts the background initialization operation. Virtual disks cannot be deleted until this operation completes.

NOTE: If the raid.ini file contains the [ Reset] section, then the RAIDCFG utility removes all the hot spares (dedicated and global) and virtual disks on the specified RAID controllers in the system.