Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

Stops an initialization operation on the specified virtual drive.

racadm raid cancelinit:<VD FQDD> {-current | -pending}

• –current <optional>: Immediately performs the configuration operation.
  NOTE If this requires the system to restart, the system will be restarted.
• –pending: Save the configuration change for a later application. You can use a combination of the –pending and –current flags on multiple commands to reduce the possible number of system rerestartts.

racadm raid cancelinit:Disk.Virtual.0:RAID.ChassisIntegrated.1-1