Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

Example

• Monitor Health of Storage root node.

  	racadm raid get status

  	Storage Root Node Status : Ok

  This command retrieves the controllers keys (FQDDs).

• Monitor and Inventory all Controllers connected to the server.

  racadm raid get controllers

  racadm raid get controllers -o

  This command is an optimized version and displays the full controller objects along with their keys.

  racadm raid get controllers -o -p <property names separated by comma>

  This command displays the filtered property values for all returned controller objects.

• Monitor and Inventory all batteries connected to the controller

  racadm raid get batteries --refkey <controller FQDDs
  separated by comma>

  This command displays all battery keys connected to the controllers referred to as refkeys.

  racadm raid get batteries --refkey <controller FQDDs
  separated by comma > -o

  This command is an optimized version and displays all battery objects for the controller FQDD.

  racadm raid get batteries --refkey <controller FQDDs
  separated by comma > -o -p <property names separated by comma>

  This command is an optimized and filtered version.

  racadm raid get batteries --refkey <controller FQDDs
  separated by comma > -o -p <property names separated by comma>

• Monitor and Inventory all virtual disks connected to the controller

  racadm raid get vdisks --refkey <controller FQDDs
  separated by comma>

  This command displays all vdisk keys connected to the controllers being mentioned as refkeys.

  racadm raid get vdisks --refkey <controller FQDDs
  separated by comma > -o

  This command is an optimized version and displays all vdisk objects for the controller FQDD.

  racadm raid get vdisks

  racadm raid get vdisks --refkey RAID.ChassisSlot.5-1 -o -p status
  

  racadm Disk.Virtual.5:RAID.ChassisSlot.5-1
  Status                           = Ok

  racadm Disk.Virtual.0:RAID.ChassisSlot.5-1
  Status                           = Ok

  racadm Disk.Virtual.1:RAID.ChassisSlot.5-1
  Status                           = Ok

  racadm Disk.Virtual.2:RAID.ChassisSlot.5-1
  Status                           = Ok

• Monitor and Inventory all storage enclosures connected to the controller

  racadm raid get enclosures --refkey <controller FQDDs
  separated by comma>

  This command displays all enclosure keys connected to the controller being mentioned as refkeys.

  racadm raid get enclosures --refkey <controller FQDDs
  separated by comma > -o optimized version.

  This command displays all enclosure objects for the controller’s FQDD.

  racadm raid get enclosures --refkey <controller FQDDs
  separated by comma > -o -p <property names separated by comma>

  This command is an optimized and filtered version.

• Monitor and Inventory all Physical Disks connected to the enclosure /Controllers

  racadm raid get pdisks --refkey <enclosure/Controllers
  FQDDs separated by comma>

  This command displays all physical disk keys connected to the enclosures being mentioned as refkeys.

  racadm raid get pdisks --refkey <enclosure/Controllers
  FQDDs separated by comma > -o

  This command displays the wear gauge property of the Solid State Drives (SSDs).

  racadm raid get pdisks -o -p RemainingRatedWriteEndurance

  This command is an optimized version and displays all disk objects for the enclosure FQDD.

  racadm raid get pdisks --refkey <enclosure/Controllers
  FQDDs separated by comma > -o -p <property names separated by comma>
  optimized and filtered version.

• Monitor and Inventory all Fans connected to the enclosure

  racadm raid get fans --refkey <enclosure/Controllers FQDDs separated
  by comma>

  This command displays all fan keys connected to the enclosures referred as refkeys.

  racadm raid get fans --refkey <enclosure/Controllers FQDDs separated
  by comma > -o optimized version.

  This command displays all fan objects for the enclosure FQDD.

  racadm raid get fans --refkey <enclosure/Controllers FQDDs separated
  by comma > -o -p <property names separated by comma> optimized and
  filtered version.

• Monitor and Inventory all EMMs connected to the enclosure

  racadm raid get emms --refkey <enclosure/Controllers FQDDs separated
  by comma>

  This command returns all EMM keys connected to the enclosures being mentioned as refkeys.

  racadm raid get emms --refkey <enclosure/Controllers FQDDs separated
  by comma > -o

  This command is an optimized version and displays all EMM objects for the enclosure FQDD.

  racadm raid get emms --refkey <enclosure/Controllers FQDDs separated
  by comma > -o -p <property names separated by comma>

  This command is an optimized and filtered version.

• Monitor and Inventory all Temperature Probes connected to the enclosure

  racadm raid get tempprobes --refkey <enclosure/Controllers FQDDs
  separated by comma>

  This command displays all temperature probe keys connected to the enclosures being mentioned as refkeys.

  racadm raid get tempprobes --refkey <enclosure/Controllers FQDDs
  separated by comma > -o

  This command is an optimized version and displays all temperature probe objects for the enclosure FQDD.

  racadm raid get tempprobes --refkey <enclosure FQDDs
  separated by comma > -o -p <property names separated by comma>
  optimized and filtered version

• Monitor and Inventory all Power Supply Units connected to the enclosure

  racadm raid get psus --refkey <enclosure/Controllers FQDDs separated
  by comma>

  This command displays all power supply units connected to the enclosures being mentioned as refkeys.

  racadm raid get psus --refkey <enclosure/Controllers FQDDs separated
  by comma > -o

  This command is an optimized version and displays all power supply units objects for the enclosure FQDD.

  racadm raid get psus --refkey <enclosure/Controllers FQDD's separated
  by comma > -o -p <property names separated by comma>

  This command is an optimized and filtered version.