Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

racdump


Description	This subcommand displays the comprehensive chassis status and configuration state information, and historic event logs. Used for post-deployment configuration verification and during debugging sessions. To use this subcommand for CMC, you must have the Administrator privilege.
Synopsis	racadm racdump
Input	Racdump includes the following subsystems and aggregates the following RACADM commands: General System/RAC information - getsysinfo Session information - getssinfo Sensor information - getsensorinfo Switches information (IO Module) - getioinfo Mezzanine card information (Daughter card) - getdcinfo All modules information - getmodinfo Power budget information - getpbinfo KVM information - getkvminfo NIC information (CMC module) - getniccfg Redundancy information - getredundancymode Trace log information - gettracelog RAC event log - getraclog System event log - getsel
Output	The following information is displayed when the racdumpsubcommand is processed: General system/RAC information Coredump Session information Process information Firmware build information

Example

racadm racdump

===============================================================================
 General System/RAC Information
===============================================================================

CMC Information:
CMC Date/Time           = Wed, 28 Nov 2007 11:55:49 PM
CMC Version             = X08
Last Firmware Update    = Wed Nov 21 21:37:56 2007
Hardware Version        = 2
Current IP Address      = 192.168.155.10
Current IP Gateway      = 192.168.155.1
Current IP Netmask      = 255.255.255.128
DHCP Enabled            = 1
MAC Address             = 00:55:AB:39:10:0F
Current DNS Server 1    = 0.0.0.0
Current DNS Server 2    = 0.0.0.0
DNS Servers from DHCP   = 0
Register DNS CMC Name   = 0
DNS CMC Name            = cmc-servicetag
Current DNS Domain      =


Chassis Information:
System Model            = PowerEdge VRTX
System AssetTag         = 00000
Service Tag             =
Chassis Name            = Dell Rack System
Chassis Location        = [UNDEFINED]
Power Status            = ON

===============================================================================
 Session Information
===============================================================================

Type    User     IP Address      Login Date/Time
SSH     root     192.168.155.10     11/28/2007 23:40:53
KVM     root     169.254.31.30   11/28/2007 18:44:51

===============================================================================
 Sensor Information
===============================================================================

<senType> <Num> <sensorName> <status> <reading> <units> <lc>
<uc>
FanSpeed    1    Fan-1         OK      14495    rpm     7250 14500
FanSpeed    2    Fan-2         OK      14505    rpm     7250 14500
FanSpeed    3    Fan-3         OK       4839    rpm     2344 14500
FanSpeed    4    Fan-4         OK      14527    rpm     7250 14500
FanSpeed    5    Fan-5         OK      14505    rpm     7250 14500
FanSpeed    6    Fan-6         OK       4835    rpm     2344 14500
FanSpeed    7    Fan-7         OK      14521    rpm     7250 14500
FanSpeed    8    Fan-8       Not OK        1    rpm     7250 14500
FanSpeed    9    Fan-9         OK       4826    rpm     2344 14500

<senType> <Num> <sensorName> <status> <reading> <units> <lc>
<uc>
Temp        1   Ambient_Temp    OK       21     celcius  N/A  40

<senType> <Num>  <sensorName>  <status>   <AC-OK status>
PWR         1       PS-1        Online          OK
PWR         2       PS-2        Online          OK
PWR         3       PS-3        Online          OK
PWR         4       PS-4       Slot Empty       N/A
PWR         5       PS-5        Failed          OK
PWR         6       PS-6        Slot Empty      N/A

Bienvenido

Bienvenido a Dell

Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

racdump

Califique este contenido