Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

get enclosure


Description	Displays the status and attributes of the enclosure. NOTE To use this subcommand, you must have the CMC Login User privilege.
Synopsis	racadm raid get enclosures -o -p Status racadm raid get enclosures -o
Input	-o — The -o is used to display the fault-tolerant status of a enclosure. -p — The network password of the share.
Example	racadm raid get enclosures -o -p Status Enclosure.Internal.0-0:RAID.ChassisIntegrated.2-1 Status = Ok Enclosure.External.0-1:RAID.ChassisSlot.5-1 Status = Ok Enclosure.External.0-0:RAID.ChassisSlot.5-1 Status = Failed racadm raid get enclosures -o Enclosure.Internal.0-0:RAID.ChassisIntegrated.2-1 Status = Ok RollupStatus = Ok Name = VRTX2.5x25 0:0 BayId = 0 FirmwareVersion = 2.00 AssetTag = elan3 AssetName = VRTX200 ternal backplane SasAddress = Not applicable SlotCount = 25 Enclosure.External.0-1:RAID.ChassisSlot.5-1 Status = Ok RollupStatus = Ok Name = MD1220 0:1 EnclosurePosition = 1 ConnectedPort = 0 FirmwareVersion = 1.05 ServiceTag = 6Q2XMQ1 AssetTag = slot 5 1 AssetName = MD1220 RedundantPath = Present SasAddress = Not applicable SlotCount = 24 Enclosure.External.0-0:RAID.ChassisSlot.5-1 Status = Failed RollupStatus = Failed Name = MD1220 0:0 EnclosurePosition = 0 ConnectedPort = 0 FirmwareVersion = 1.05 ServiceTag = BWQPWP1 AssetTag = slot 5 0 AssetName = MD1220 RedundantPath = Present SasAddress = Not applicable SlotCount = 24