Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

PDF

eventfilters


Description	Gets, sets, and displays the list of event filter settings. To use this subcommand with the get option, you must have the CMC Login User privilege.
Synopsis	racadm eventfilters <eventfilters command type> racadm eventfilters get -c <alert descriptor> racadm eventfilters set -c <alert descriptor>-n <notifications> NOTE The general format of an alert descriptor: cmc.alert.category.[subcategory].[severity] where, category is mandatory, but subcategory and severity are optional. A severity cannot precede a subcategory. Valid category values are: System Config Updates Storage Audit Valid severity values are: Critical Warning Informational Valid examples of alert descriptors are: cmc.alert.all cmc.alert.audit cmc.alert.audit.lic cmc.alert.audit.warning cmc.alert.audit.lic.critical
Input	get - Displays the list of event filter settings. set - Configures the actions and notifications for a given event filter configuration. -c - Alert descriptor of the specific event filter. -n - The notification to be sent when the event occurs. Valid values are all, snmp, ipmi, lcd, email, or none. You can append multiple notifications separated by a comma. You cannot enter the values all or none with other notifications. NOTE If both event generation interval and notifications are configured and there is an error while configuring the notifications, the event generation interval is not set. The valid values are from 0–365. 0 disables the event generation.
Example	Display all available event filter configurations: racadm eventfilters get -c cmc.alert.all Display eventfilter configurations for a specific category. For example, audit: racadm eventfilters get -c cmc.alert.audit Display eventfilter configurations for a specific subcategory. For example, licensing under the audit category: racadm eventfilters get -c cmc.alert.audit.lic Display eventfilter configurations for a specific severity. For example, warning under the audit category: racadm eventfilters get -c cmc.alert.audit.warning Display eventfilter configurations for a specific severity and subcategory. For example, a severity of warning in the subcategory licensing under audit category: racadm eventfilters get -c cmc.alert.audit.lic.warning Clear all available alert settings: racadm eventfilters set -c cmc.alert.all -n none Configure using severity as a parameter. For example, all informational events in storage category are assigned poweroff as action, and email and snmp as notifications: racadm eventfilters set -c cmc.alert.storage.info -n email,snmp Configure using subcategory as a parameter. For example, all configurations under the licensing subcategory in the audit category are assigned poweroff as action and all notifications are enabled: racadm eventfilters set -c cmc.alert.audit.lic -n all Configure using subcategory and severity as parameters. For example, all Information events under the licensing subcategory in the audit category are assigned poweroff as action and all notifications are disabled: racadm eventfilters set -c cmc.alert.audit.lic.info -n none