Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

Description	Connects to the switch or server serial console.
Synopsis	racadm connect [-b] —m <module> racadm connect [-b] <server-n> racadm connect [-b] <switch-n>
Input	-b — Connects to the switch or console using the binary mode. This is an optional argument; a server or a switch must be present. NOTE If you use the -b option, reset the CMC to terminate the connect operation. server-n, where n=1–4 switch-n, where n=1 NOTE The values 2 and 4 for n are valid only for multi-node sleds. switch-n: where n = 1 to 2 or <a1 \| a2>
Example	Connect to I/O Module 1 serial console racadm connect -m switch-1 Connect to server 1 serial console racadm connect -m server-1

Bienvenido