Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

racadm setpciecfg assign [-c <FQDD>] [-i <server slot>]

racadm setpciecfg unassign [-c <FQDD>]

racadm setpciecfg ridethru -e

racadm setpciecfg ridethru -d

racadm setpciecfg ridethru -t <time out value>

• -c — Use this option to specify a PCIe adapter or Virtual Adapter.
• -i — Use this option to specify the server or module slot number.
• FQDD — FQDD of the specified PCIe slot or Virtual Adapter.
• -e — Use this option to enable the ride-through mode.

• -d — Use this option to disable the ride-through mode.

• -t — Use this option to set the time-out property of a ride-through mode in seconds (0, 60–1800; 0=infinite).

• Assign a PCIe slot to a server:

  racadm setpciecfg assign -c PCIE.ChassisSlot.5 -i 2

• Assign the Virtual Adapter to a server:

  racadm setpciecfg assign -c RAID.ChassisIntegrated.1-1-2  -i 3

• Unassign a PCIe slot:

  racadm setpciecfg unassign -c PCIE.ChassisSlot.3

• Unassign a Virtual Adapter:

  racadm setpciecfg unassign -c RAID.ChassisIntegrated.1-1-3

• Enable ride-through mode

  racadm setpciecfg ridethru -e
  IOV000: Successfully completed the operation.

• Disable ride-through mode

  racadm setpciecfg ridethru -d
  IOV000: Successfully completed the operation.

• Set the ride-through time out value in seconds (0, 60–1800; 0 = infinite)

  racadm setpciecfg ridethru -t 300
  IOV000: Successfully completed the operation.