Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

Description

Displays the contents of the network interface table.

To use this subcommand, you must have the Execute Diagnostic Commands or Configure iDRAC privilege.

Synopsis

racadm ifconfig

Example

$ racadm ifconfig

eth0     Link encap:Ethernet  HWaddr 00:1D:09:FF:DA:23

	          inet addr:10.35.155.136  Bcast:192.168.0.1
 Mask:255.255.255.0

	          UP BROADCAST RUNNING MULTICAST  MTU:1500 
Metric:1

	          RX packets:2550665 errors:0 dropped:0 overruns:0
frame:0

	          TX packets:0 errors:0 dropped:0 overruns:0
carrier:0

	          collisions:0 txqueuelen:1000

	          RX bytes:272532097 (259.9 MiB)  TX bytes:0
(0.0 B)