Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

PDF

RACADM Command Options

The following table lists the options for the RACADM command.

Table 1. Racadm command optionsThe following table contains descriptions of the racadm command options.
Option	Description
-r<racIpAddr> -r racIpAddr : <port number>	Specifies the controller’s remote IP address. Use:<port number> if the iDRAC port number is not the default port (443).
-u <usrName>	Specifies the user name that is used to authenticate the command transaction. If the -u option is used, the -p option must be used, and the -i option (interactive) is not allowed.
-p <password>	Specifies the password used to authenticate the command transaction. If the -p option is used, the -i option is not allowed.
-S	Specifies that RACADM should check for invalid certificate errors. RACADM stops the execution of the command with an error message if it detects an invalid certificate.
-I <indexnumber>	Specifies the index number for the indexed group, if applicable.
-g <groupname>	Specifies the group name, if applicable.
-o objectname	Specifies the object name, if applicable.

The following table provides the supported RACADM interfaces.

Table 2. Racadm interfacesThe following table lists the racadm interfaces.
Type	Local RACADM	SSH/Telnet RACADM	Remote RACADM
CMC	No	Yes	Yes

NOTE Multiple instances of remote RACADM can be executed on a management station.