Die Daten werden geladen. Bitte haben Sie einen Moment Geduld.
Configuring TLS Protocol
iDRAC offers three TLS protocol versions for secure webserver connections. TLS 1.3 is the most secure configuration and should be used whenever possible. TLS 1.0 is discouraged and is available only for backward compatibility.
NOTE:TLS 1.0 is removed from iDRAC firmware 4.40.00.00 and above.
NOTE:TLS 1.3 is available from iDRAC firmware 5.10.00.00 and above.
By default, iDRAC is configured to use TLS 1.1 and higher. You can configure iDRAC to use any of the following:
TLS 1.0 and higher (old firmware)
TLS 1.1 and higher
TLS 1.2 and higher
TLS 1.3 only
To configure TLS protocol to TLS 1.3:
Go to
iDRAC Settings
> Services.
Click the
Services tab and then click
Web Server.
In the
TLS Protocol drop-down, select TLS 1.3 version and click
Apply.
Keine Daten für dieses Thema verfügbar
Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
Bitte geben Sie an, ob der Artikel hilfreich war.
Die folgenden Sonderzeichen dürfen in Kommentaren nicht verwendet werden: <>()\