Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell G15 5530 Owner's Manual

Removing the USB board

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.
  3. Remove the battery.
  4. Remove the rear cover.
  5. Remove the solid-state drive.
  6. Remove the wireless card.
  7. Remove the memory module.
  8. Remove the system board.
    NOTE:The system board can be removed as an assembly with the fan and heat-sink assembly, Ethernet and audio board, and USB board attached.

About this task

The following image indicates the location of the USB board and provides a visual representation of the removal procedure.

Image: Removing the USB board

Steps

  1. Turn the system-board assembly over.
  2. Remove the two screws (M2x4) that secure the USB board to the system-board assembly.
  3. Disconnect and remove USB board from the system-board assembly.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\