Dell G15 5530 Owner's Manual

PDF

Screw list

NOTE:When removing screws from a component, it is recommended to note the screw type and the quantity of screws, and then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is restored when the component is replaced.

NOTE:Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when replacing a component.

NOTE:Screw color may vary depending on the configuration ordered.

Table 1. Screw listThe following table provides the different screws that are used in your Dell G15 5530.
Component	Screw type	Quantity	Screw image
Base cover	M2x5	6
Battery	M2x4	4
Solid-state drive (SSD slot 1)	M2x4	2
Solid-state drive (SSD slot 2)	M2x4	2
Wireless card	M2x4	1
Touchpad bracket	M2x2	3
Touchpad	M2x2	4
Rear cover	M2x4	2
Rear cover	M2x5	4
Display hinges	M2.5x4	8
Keyboard-controller board	M2x2	1
Power-adapter port	M2x5	2
System board	M2x5	7
System board	M2x4	1
USB board	M2x4	2
USB board	M2x3	1
Ethernet and audio board	M2x4	2
Ethernet and audio board	M2x3	1
Left fan (fan and heat-sink assembly)	M2x4	1
Fan and heat-sink assembly	M2x4	7
Power-button board bracket	M2x2	2
Power button	M2x2	1