Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell PowerEdge RAID Controller 10 User’s Guide PERC H345, H740P, H745, and H840 Series Controllers

PERC card specifications

The table below lists and describes the different PERC cards that consist of the PERC 10 series and their specifications:

Table 1. PERC cardsThe following table lists and describes the different PERC cards that consist of the PERC 10 series and their specifications.
Feature PERC H345 PERC H740P PERC H745 PERC H745P MX PERC H840
RAID levels 0, 1, 10 0, 1, 5, 6, 10, 50, 60 0, 1, 5, 6, 10, 50, 60 0, 1, 5, 6, 10, 50, 60 0, 1, 5, 6, 10, 50, 60
Non-RAID Yes Yes Yes Yes N/A
Enclosures per port Not applicable Not applicable Not applicable Not applicable 4
Processor Dell adapter SAS RAID-on-chip, 16-port with LSI 3416 chipset Dell adapter SAS RAID-on-chip, 8-port with LSI 3508 chipset Dell adapter SAS RAID-on-chip, 16-port with LSI 3516 chipset Dell adapter SAS RAID-on-chip, 16-port with LSI 3516 chipset Dell adapter SAS RAID-on-chip, 8-port with LSI 3508 chipset
Battery backup unit No Yes Yes Yes Yes
eHBA No Yes Yes Yes No
LKM security No Yes Yes Yes Yes
Controller queue depth (RAID mode) 1536 4096 4096 3072 4096 with PD64 profile, 3072 with PD240 profile
Controller Queue Depth (eHBA) N/A 5120 5120 5120 N/A
Enterprise key manager mode No Yes Yes No No
Nonvolatile cache No Yes Yes Yes Yes
Cache memory N/A 8 GB DDR4 2133 Mhz cache 4 GB DDR4 2133 Mhz cache 8 GB DDR4 2133 Mhz cache 8 GB DDR4 2133 Mhz cache
Cache function Write through and no read ahead. Write back, write through, no read ahead, and read ahead. Write back, write through, no read ahead, and read ahead. Write back, write through, no read ahead, and read ahead. Write back, write through, no read ahead, and read ahead.
Max no of VDs in RAID mode 32 64 64 240 240
Max no of disks in eHBA mode Not applicable 240 (combination of virtual disks and Non-Raid disks). 240 (combination of virtual disks and Non-Raid disks) 240 ( combination of virtual disks and Non-Raid disks). Not applicable
Max no of VDs per disk group 16 16 16 16 16
Max no of disk groups 32 64 64 240 240
Hot swap devices supported Yes Yes Yes Yes Yes
Hardware XOR engine Not applicable Yes Yes Yes Yes
Online capacity expansion Yes in operating system only Yes Yes Yes Yes
Dedicated and global hot spare Yes Yes Yes Yes Yes
Autoconfigure N/A RAID 0 RAID 0 RAID 0 RAID 0
Drives types 3 Gbps SATA, 6 Gbps SATA/SAS, and 12 Gbps SAS 3 Gbps SATA, 6 Gbps SATA/SAS, and 12 Gbps SAS 3 Gbps SATA, 6 Gbps SATA/SAS, and 12 Gbps SAS 3 Gbps SATA, 6 Gbps SATA/SAS, and 12 Gbps SAS 6 Gbps SAS, and 12 Gbps SAS
VD strip size 64 kB 64 kB, 128 kB, 256 kB, 512 kB, 1 MB 64 kB, 128 kB, 256 kB, 512 kB, 1 MB 64 kB, 128 kB, 256 kB, 51 2 kB, 1 MB 64 kB, 128 kB, 256 kB, 512 kB, 1 MB
PCIe support Gen 3 Gen 3 Gen 3 Gen 3 Gen 3
Maximum drive support
  • Without SAS Expander: 16 per controller
  • With SAS Expander: Limited by platform offering
  • Without SAS Expander: 8 drives per controller
  • With SAS Expander: Limited by platform offering
  • Without SAS Expander: 16 drives per controller
  • With SAS Expander: Limited by platform offering
  • Without SAS Expander: 16 drives per controller
  • With SAS Expander: Limited by platform offering
240
NOTE:Enhanced HBA mode is supported from firmware version 50.5.0-1750 and later.
NOTE:Enterprise key manager mode is supported from firmware version 50.5.1-2633 and later.
NOTE:240 virtual disks can be created only within a PD240 profile, for more information see Profile Management.
NOTE:For information on number of drives in a disk group per virtual disk, see Summary of RAID levels.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\