Precision 3480 Owner's Manual

Installing the memory module

About this task

The following image(s) indicate the location of the memory module and provides a visual representation of the installation procedure.

1. Align the notch on the memory module with the tab on the memory-module slot.
2. Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place.
   NOTE:If you do not hear the click, remove the memory module and reinstall it.

   CAUTION:To prevent damage to the memory module, hold the memory module by the edges. Do not touch the components or metallic contacts on the memory module as electrostatic discharge (ESD) can inflict severe damage on the components. To read more about ESD protection, see ESD protection.