Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

capture bgp-pdu neighbor

Enable capture of an IPv4 BGP neighbor packet.

Syntax

capture bgp-pdu neighbor ipv4-address direction {both | rx | tx}

To disable capture of the IPv4 BGP neighbor packet, use the no capture bgp-pdu neighbor ipv4-address command.

Parameters

ipv4-address	Enter the IPv4 address of the target BGP neighbor.
direction {both \| rx \| tx}	Enter the keyword `direction` and a direction — either `rx` for inbound, `tx` for outbound, or both.

Defaults

Not configured.

Command Modes

EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Related Commands

capture bgp-pdu max-buffer-size — specifies a size for the capture buffer.

show capture bgp-pdu neighbor — displays BGP packet capture information.