Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

exec-timeout

Set a time interval that the system waits for input on a line before disconnecting the session.

Syntax

exec-timeout minutes [ seconds]

To return to default settings, use the no exec-timeout command.

Parameters

minutes	Enter the number of minutes of inactivity on the system before disconnecting the current session. The range is from 0 to 35791. The default is 10 minutes for the console line and 30 minutes for the VTY line.
seconds	(OPTIONAL) Enter the number of seconds. The range is from 0 to 2147483. The default is 0 seconds.

Defaults

10 minutes for console line; 30 minutes for VTY lines; 0 seconds

Command Modes

LINE

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

To remove the time interval, use the exec-timeout 0 0 command.

Example

Dell con0 is now available
                                             Press RETURN to get started.
                                             Dell>