Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

maximum-paths

Configure the maximum number of parallel routes (multipath support) BGP supports.

Syntax

maximum-paths {ebgp | ibgp} number

To return to the default values, use the no maximum-paths command.

Parameters

ebgp	Enter the keyword `ebgp` to enable multipath support for External BGP routes.
ibgp	Enter the keyword `ibgp` to enable multipath support for Internal BGP routes.
number	Enter a number as the maximum number of parallel paths. The range is from 1 to 16. The default is 1.

Defaults

1

Command Modes

ROUTER BGPV6-ADDRESS FAMILY

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

If you enable this command, use the capture bgp-pdu max-buffer-size command to recompute the best path.