Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

tc-flush-standard

Enable the MAC address flushing after receiving every topology change notification.

Syntax

tc-flush-standard

To disable, use the no tc-flush-standard command.

Defaults

Disabled.

Command Modes

CONFIGURATION

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

By default, the sytem implements an optimized flush mechanism for MSTP. This mechanism helps in flushing the MAC addresses only when necessary (and less often) allowing for faster convergence during topology changes. However, if a standards-based flush mechanism is needed, this knob command can be turned on to enable flushing MAC addresses after receiving every topology change notification.