Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

default-information originate

Generate a default route for the RIP traffic.

Syntax

default-information originate [always] [metric metric-value] [route-map map-name]

To return to the default values, use the no default-information originate command.

Parameters

always	(OPTIONAL) Enter the keyword `always` to enable the switch software to always advertise the default route.
metric metric-value	(OPTIONAL) Enter the keyword `metric` then a number as the metric value. The range is from 1 to 16. The default is 1.
route-map map-name	(OPTIONAL) Enter the keywords `route-map` then the name of a configured route-map.

Defaults

Disabled. Metric: 1.

Command Modes

ROUTER RIP

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

The default route must be present in the switch routing table for the default-information originate command to take effect.