Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

clear ip dhcp

Reset the DHCP counters.

Syntax

clear ip dhcp [binding { address} | conflict | server statistics]

Parameters

binding	Enter the keyword `binding` to delete all entries in the binding table.
address	Enter the IP address to clear the binding entry for a single IP address.
conflicts	Enter the keyword `conflicts` to delete all of the log entries created for IP address conflicts.
server statistics	Enter the keywords `server statistics` to clear all the server counter information.

Defaults

none

Command Modes

EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

Entering <CR> after the clear ip dhcp binding command clears all the IPs from the binding table.