Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

line

Enable and configure console and virtual terminal lines to the system. This command accesses LINE mode, where you can set the access conditions for the designated line.

Syntax

line {console 0 | vty number [ end-number]}

Parameters

console 0

Enter the keyword console 0 to configure the console port.

The console option is <0-0>.

vty number

Enter the keyword vty followed by a number from 0 to 9 to configure a virtual terminal line for Telnet sessions.

The system supports 10 Telnet sessions.

end-number

(OPTIONAL) Enter a number from 1 to 9 as the last virtual terminal line to configure.

You can configure multiple lines at one time.

Defaults

Not configured

Command Modes

CONFIGURATION

Supported Modes

All Modes

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.4(0.0)	Supported on the FN I/O Aggregator.
8.3.17.0	Supported on the M I/O Aggregator.

Usage Information

You cannot delete a terminal connection.

Related Commands

show memory— View current memory usage on the M I/O Aggregator.