Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

service-policy rate-limit-protocols

Apply a policy for the system to rate limit control protocols on a per-protocol basis.

Syntax

service-policy rate-limit-protocols policy-name

Parameters

policy-name

Enter the service-policy name, using a string up to 32 characters.

Defaults

Not configured.

Command Modes

CONTROL-PLANE-CPUQOS

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
9.2(0.0)	Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information

This command applies the service-policy based on the type of protocol defined in the ACL rules.

Create ACL and QoS policies prior to enabling this command.

For CoPP, do not use the keywords cpu-qos when creating qos-policy-input.

Related Commands

ip access-list extended — creates an extended IP ACL.

mac access-list extended — creates an extended MAC ACL.

qos-policy-input — creates a QoS input policy map.

class-map — creates a QoS class map.

policy-map-input — creates an input policy map.