Dell PowerEdge FN I/O Module Command Line Reference Guide 9.10(0.0)

PDF

show mac access-lists

Display all of the Layer 2 ACLs configured in the system, whether or not they are applied to an interface, and the count of matches/mismatches against each ACL entry displayed.

Syntax

show mac access-lists [ access-list-name] [interface interface] [in | out]

Parameters

access-list-name	Enter the name of a configured MAC ACL, up to 140 characters.
interface interface	Enter the keyword `interface` then the one of the following keywords and slot/port or number information: For a Port Channel interface, enter the keywords `port-channel` and then enter a number. The range is from 1 to 128. For a 10-Gigabit Ethernet interface, enter the keyword `TenGigabitEthernet` and then enter the slot/port information. For a VLAN interface enter the keyword VLAN and then the vlan id.
in \| out	Identify whether ACL is applied on ingress or egress side.

Command Modes

EXEC Privilege

Supported Modes

Full–Switch

Command History

Version	Description
9.9(0.0)	Introduced on the FN IOM.
8.3.16.1	Introduced on the MXL 10/40GbE Switch IO Module.