Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products

Dell PowerEdge RAID Controller 11 User’s Guide PERC H755, H750, H355, and H350 Controller Series

Repair drives with correctable NVMe initialization errors

Repair the drives with correctable NVMe initialization errors in HII to enable the drives to work properly.

About this task

Repairs can lead to permanent data loss in drives. Also, certain types of repairs can take a long time.

Steps

  1. Log in to HII.
  2. Go to Main Menu > Hardware Components > Enclosure Management.
    The drives with correctable and non-correctable errors are listed.
  3. Select the drive and click Repair.
    If the repair is successful, the drive is listed under physical drives and removed from the correctable error list. If the drive has other correctable errors, the drive is listed again in the correctable errors list.
  4. If the repair is not successful, click Repair again.
    NOTE:In case you want to stop the repair, stop the repair from the Ongoing repairs list.
    If the error is still not resolved or if the drive has other non-correctable errors, the drive is moved to the non-correctable error list.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\