Dell PowerEdge RAID Controller 11 User’s Guide PERC H755, H750, H355, and H350 Controller Series

Update PERC 11 driver that runs on Windows Server 2016 and later

1. Insert the media containing the driver.
2. Select Start > Settings > Control Panel > System.
   The System Properties screen is displayed.

   NOTE:The path to System might vary depending on the operating system family.
3. Click the Hardware tab.
4. Click Device Manager.
   The Device Manager screen is displayed.

   NOTE:The path to Device Manager might vary depending on the operating system family.
5. Expand Storage Controllers by double-clicking the entry or by clicking on the plus (+) symbol next to Storage Controllers.
6. Double-click the RAID controller for which you want to update the driver.
7. Click the Driver tab and click Update Driver.
   The screen to update the device driver wizard is displayed.
8. Select Install from a list or specific location.
9. Click Next.
10. Follow the steps in the wizard and browse to the location of the driver files.
11. Select the INF file from the drive media.
12. Click Next and continue the installation steps in the wizard.
13. Click Finish to exit the wizard and reboot the system for the changes to take place.
    NOTE:Dell provides the Dell Update Package (DUP) to update drivers on systems running Windows Server 2016 and newer operating system. DUP is an executable application that updates drivers for specific devices. DUP supports command line interface and silent execution. For more information, see https://www.dell.com/support.