Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Baskets

Dell PowerEdge R6525 Installation and Service Manual

PDF

Cable routing

Figure 1. 4 x 3.5-inch SAS with one processor and front PERC module
4 x 3.5-inch SAS with one processor and front PERC module
Figure 2. 4 x 3.5-inch SAS with dual processor and front PERC module
4 x 3.5-inch SAS with dual processor and front PERC module
Figure 3. 4 x 3.5-inch SATA with no PERC module
4 x 3.5-inch SATA with no PERC module
Figure 4. 8 x 2.5-inch SAS with front PERC module
8 x 2.5-inch SAS with front PERC module
Figure 5. 4 x 3.5-inch SAS with 2 x 2.5-inch SAS rear drives
4 x 3.5-inch SAS with 2 x 2.5-inch SAS rear drives
Figure 6. 4 x 3.5-inch SAS with 2 x 2.5-inch rear NVMe
4 x 3.5-inch SAS with 2 x 2.5-inch rear NVMe
Figure 7. 10 x 2.5-inch SAS with 2 x 2.5-inch SAS rear drives
10 x 2.5-inch SAS with 2 x 2.5-inch SAS rear drives
Figure 8. 10 x 2.5-inch SAS XGMI
10 x 2.5-inch SAS XGMI
Figure 9. 10 x 2.5-inch Universal backplane
10 x 2.5-inch Universal backplane
Figure 10. 10 x 2.5-inch NVMe backplane (48 mode)
10 x 2.5-inch NVMe backplane (48 mode)
Figure 11. 10 X 2.5-inch NVMe (64 mode)
10 X 2.5-inch NVMe (64 mode)
Figure 12. 10 X 2.5-inch SAS with 2 x 2.5-inch SAS rear drive
10 X 2.5-inch SAS with 2 x 2.5-inch SAS rear drive
Figure 13. 10 x 2.5-inch SAS with 2 x 2.5-inch NVMe drive
10 x 2.5-inch SAS with 2 x 2.5-inch NVMe drive
Figure 14. 8 x 2.5- inch NVMe RAID
8 x 2.5- inch NVMe RAID

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\