Dell PowerEdge R6525 Installation and Service Manual

Right control panel view

Table 1. Right control panelItem 1 is the power button, indicates if the system is turned on or off. Item 2 is the USB port, enables you to connect USB devices to the system. Item 3 is the iDRAC Direct LED, indicates that the iDRAC Direct port is connected. Item 4 is the iDRAC Direct port, enables you to access the iDRAC direct features.
Item	Indicator or button	Icon	Description
1	Power button		Indicates if the system is powered on or off. Press the power button to manually power on or off the system. NOTE:Press the power button to gracefully shut down an ACPI-compliant operating system.
2	USB 2.0-compliant port		The USB port is a 4-pin connector and 2.0-compliant. This port enables you to connect USB devices to the system.
3	iDRAC Direct LED indicator	N/A	The iDRAC Direct LED indicator lights up to indicate that the iDRAC Direct port is actively connected to a device.
4	iDRAC Direct port (Micro-AB USB)		The iDRAC Direct port (Micro-AB USB) enables you to access the iDRAC Direct Micro-AB features. For more information, see the Integrated Dell Remote Access Controller User's Guide. NOTE:You can configure iDRAC Direct by using a USB to micro USB (type AB) cable, which you can connect to your laptop or tablet. Cable length should not exceed 3 ft (0.91 meters). Quality of the cable might affect performance.

NOTE:For more information about the ports, see the www.dell.com/poweredgemanuals section.