Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Baskets

Dell PowerEdge R6525 Installation and Service Manual

PDF

Removing the expansion card risers

Prerequisites

  1. Follow the safety guidelines listed in the Safety instructions.
  2. Follow the procedure listed in the Before working inside your system.
  3. Disconnect any cables that are connected to the expansion card.

Steps

  1. For Riser 1, press the blue tab and holding the edges lift the expansion card riser from the riser connector on the system board.
    Figure 1. Removing the expansion card riser (Riser 1)
    This image how to remove Riser 1.
  2. For Riser 2 and liquid cooling Riser 2, press the blue button on the riser, and holding the touch points lift the expansion card riser from the riser connector on the system board.
    NOTE:The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
    Figure 2. Removing the expansion card riser (Riser 2)
    This image shows how to remove Riser 2.
    Figure 3. Removing the liquid cooling expansion card riser (liquid cooling Riser 2)
    This image shows the steps to remove the liquid cooling expansion card riser (liquid cooling Riser 2)
  3. For Riser 3 and liquid cooling Riser 3, press the blue button on the riser, and lift the expansion card riser from the riser connector on the system board.
    Figure 4. Removing the expansion card riser (Riser 3)
    This image shows how to remove Riser 3.
    Figure 5. Removing the liquid cooling expansion card riser (liquid cooling Riser 3)
    This image shows the steps to remove the liquid cooling expansion card riser (liquid cooling Riser 3)
  4. For Riser 4, press the blue tab on the riser, and holding the touch point lift the expansion card riser from the riser connector on the system board.
    Figure 6. Removing the expansion card riser (Riser 4)
    This image shows how to remove Riser 4.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\