The objects provide information about the Battery
storage group.
NOTE The Storage
Details Group is introduced in VRTX CMC from this release. The
iDRAC and CMC have the same Storage attributes with some modification
in CMC. The Object ID mentioned example: 1.3.6.1.4.1.674.10892.5.5.1.20.130.15.1.1 for the table group are attributes
for checking on iDRAC. To check the corresponding set of attributes
for VRTX CMC systems, use the Object ID example: 1.3.6.1.4.1.674.10892.2.6.1.20.130.15.1.1.
Table 1. Battery NumberThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
batteryNumber
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.15.1.1
Description
Instance number of this battery entry.
Syntax
INTEGER
Access
read-only
Table 2. Battery StateThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
batteryState
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.15.1.4
Description
Current state of battery. Possible values:
The current state could not be determined.
The battery is operating normally.
The battery has failed and needs to
be replaced.
The battery temperature is high or
charge level is depleting.
The battery is missing or not detected.
The battery is undergoing the re-charge
phase.
The battery voltage or charge level
is below the threshold.
Syntax
INTEGER
Access
read-only
Table 3. Battery Component
StatusThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
batteryComponentStatus
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.15.1.6
Description
The status of the battery itself without the propagation
of any contained component status. Possible values:
Other
Unknown
OK
Non-critical
Critical
Non-recoverable
Syntax
ObjectStatusEnum
Access
read-only
Table 4. Battery Predicted
CapacityThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
batteryPredictedCapacity
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.15.1.10
Description
This entry is obsolete. Use the battery Component
Status or battery State instead.
Syntax
INTEGER
Access
read-only
Table 5. Battery FQDDThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
batteryFQDD
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.15.1.20
Description
The battery's Fully Qualified Device Descriptor
(FQDD) as represented in Storage Management.
Syntax
DisplayString
Access
read-only
Table 6. Battery Display
NameThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
batteryDisplayName
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.15.1.21
Description
The battery's friendly FQDD as represented in Storage
Management.
Syntax
DisplayString
Access
read-only
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\