The objects provide information about the Enclosure
Table group in storage.
NOTE The Storage
Details Group is introduced in VRTX CMC from this release. The
iDRAC and CMC have the same Storage attributes with some modification
in CMC. The Object ID mentioned example: 1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.1 for the table group are attributes
for checking on iDRAC. To check the corresponding set of attributes
for VRTX CMC systems, use the Object ID example: 1.3.6.1.4.1.674.10892.2.6.1.20.130.3.1.1.
Table 1. Enclosure NumberThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosureNumber
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.1
Description
Instance number of this enclosure/backplane.
Syntax
INTEGER
Access
not-Accessible
Table 2. Enclosure NameThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosureName
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.2
Description
The enclosure/backplane's name as represented in
Storage Management.
Syntax
DisplayString
Access
read-only
Table 3. Enclosure StateThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosureState
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.4
Description
The current state of this enclosure/backplane.
Possible states:
The current state could not be determined.
The enclosure is operating normally.
The enclosure has encountered a hardware
problem or is not responding.
The enclosure is no longer connected
to the controller or there exists a problem communicating to the enclosure.
The enclosure is unstable.
The enclosure is inactive due to
being configured by another controller.
The enclosure is offline and inAccessible.
The enclosure is online and Accessible.
The enclosure is currently blocked
by another controller.
Syntax
INTEGER
Access
read-only
Table 4. Enclosure Service
TagThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosureServiceTag
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.8
Description
Enclosure identification used when consulting customer
support.
Syntax
DisplayString
Access
read-only
Table 5. Enclosure Asset
TagThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosureAssetTag
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.9
Description
The asset tag information for the enclosure.
Syntax
DisplayString
Access
read-only
Table 6. Enclosure Connected
PortThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosureConnectedPort
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.19
Description
The port on the controller to which the storage
enclosure is connected.
Syntax
DisplayString
Access
read-only
Table 7. Enclosure Roll
Up StatusThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosureRollUpStatus
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.23
Description
Severity of the enclosure/backplane state. This
is the combined status of the enclosure and its sub-components. Possible
values:
Other
Unknown
OK
Non-critical
Critical
Non-recoverable
Syntax
ObjectStatusEnum
Access
read-only
Table 8. Enclosure Firmware
VersionThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosureFirmwareVersion
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.26
Description
The firmware information for the enclosure/backplane.
Syntax
DisplayString
Access
read-only
Table 9. Enclosure SAS
AddressThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosureSASAddress
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.30
Description
The SAS address of the enclosure/backplane.
Syntax
DisplayString
Access
read-only
Table 10. Enclosure Drive
CountThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosureDriveCount
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.31
Description
The number of disks present in the enclosure/backplane.
Syntax
INTEGER
Access
read-only
Table 11. Enclosure Total
SlotsThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosureTotalSlots
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.32
Description
The total physical drive slots in a storage enclosure
or server backplane.
Syntax
INTEGER
Access
read-only
Table 12. Enclosure Fan
CountThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosureFanCount
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.40
Description
The number of fans present in the storage enclosure.
Syntax
DisplayString
Access
read-only
Table 13. Enclosure PSU
CountThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosurePSUCount
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.41
Description
The number of Power Supply Units (PSU) present
in the storage enclosure.
Syntax
DisplayString
Access
read-only
Table 14. Enclosure EMM
CountThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosureEMMCount
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.42
Description
The number of Enclosure Management Modules (EMM)
present in the storage enclosure.
Syntax
DisplayString
Access
read-only
Table 15. Enclosure Temp
Probe CountThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosureTempProbeCount
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.43
Description
The number of temperature sensing devices present
in the storage enclosure.
Syntax
DisplayString
Access
read-only
Table 16. Enclosure Redundant
PathThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosureRedundantPath
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.44
Description
Indicates whether the controller has multiply
paths to reach the storage enclosure.
Syntax
DisplayString
Access
read-only
Table 17. Enclosure PositionThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosurePosition
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.45
Description
The position of the storage enclosure within a
daisy chain.
Syntax
DisplayString
Access
read-only
Table 18. Enclosure Backplane
Bay IDThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosureBackplaneBayID
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.46
Description
The unique bay ID of the backplane.
Syntax
DisplayString
Access
read-only
Table 19. Enclosure FQDDThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosureFQDD
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.47
Description
The enclosure/backplane's Fully Qualified Device
Descriptor (FQDD) as represented in Storage Management.
Syntax
FQDDString
Access
read-only
Table 20. Enclosure Display
NameThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosureDisplayName
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.48
Description
The enclosure/backplane's friendly FQDD as represented
in Storage Management.
Syntax
DisplayString
Access
read-only
Table 21. Enclosure TypeThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosureType
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.3.1.49
Description
The protocol supported by the backplane. Possible
states:
Not one of the following or could
not be determined.
Not applicable (i.e. object is not
a backplane).
Supports SAS/SATA.
Supports PCIe
Both SAS/SATA and PCIe
Syntax
INTEGER
Access
read-only
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\