The objects provide information about the Virtual disk
storage group.
NOTE The Storage
Details Group is introduced in VRTX CMC from this release. The
iDRAC and CMC have the same Storage attributes with some modification
in CMC. The Object ID mentioned example: 1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.1 for the table group are attributes
for checking on iDRAC. To check the corresponding set of attributes
for VRTX CMC systems, use the Object ID example: 1.3.6.1.4.1.674.10892.2.6.1.20.140.1.1.1.
Table 1. Virtual Disk
NumberThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskNumber
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.1
Description
Instance number of this virtual disk entry.
Syntax
INTEGER
Access
not-Accessible
Table 2. Virtual Disk
NameThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskName
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.2
Description
The virtual disk's label as entered by the user.
Syntax
DisplayString
Access
read-only
Table 3. Virtual Disk
StateThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskState
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.4
Description
The current state of this virtual disk (which includes
any member physical disks.)Possible states:
The current state could not be determined.
The virtual disk is operating normally
or optimally.
The virtual disk has encountered a
failure. The data on disk is lost or is about to be lost.
The virtual disk encountered a failure
with one or all of the constituent redundant physical disks. The data
on the virtual disk might no longer be fault tolerant.
Syntax
INTEGER
Access
read-only
Table 4. Virtual Disk
Size In MBThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskSizeInMB
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.6
Description
The size of the virtual disk in megabytes.
Syntax
INTEGER
Access
read-only
Table 5. Virtual Disk
Write PolicyThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskWritePolicy
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.10
Description
The write policy used by the controller for write
operations on this virtual disk. Possible values:
Write Through.
Write Back.
Force Write Back.
Syntax
INTEGER
Access
read-only
Table 6. Virtual Disk
Read PolicyThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskReadPolicy
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.11
Description
The read policy used by the controller for read
operations on this virtual disk. Possible values:
No Read Ahead.
Read Ahead.
Adaptive Read Ahead.
Syntax
INTEGER
Access
read-only
Table 7. Virtual Disk
LayoutThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskLayout
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.13
Description
The virtual disk's RAID type. Possible values:
Not one of the following
RAID-0
RAID-1
RAID-5
RAID-6
RAID-10
RAID-50
RAID-60
Concatenated RAID 1
Concatenated RAID 5
Syntax
INTEGER
Access
read-only
Table 8. Virtual Disk
Stripe SizeThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskStripeSize
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.14
Description
The stripe size of this virtual disk. Possible
values:
Not one of the following
Default
512 bytes
1 kB
2 kB
4 kB
8 kB
16 kB
32 kB
64 kB
128 kB
256 kB
512 kB
1 MB
2 MB
4 MB
8 MB
16 MB
Syntax
INTEGER
Access
read-only
Table 9. Virtual Disk
Component StatusThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskComponentStatus
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.20
Description
The status of the virtual disk itself without
the propagation of any contained component status.Possible values:
Other
Unknown
OK
Non-critical
Critical
Non-recoverable
Syntax
ObjectStatusEnum
Access
read-only
Table 10. Virtual Disk
Bad Blocks DetectedThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskBadBlocksDetected
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.23
Description
Indicates whether the virtual disk has bad blocks.
Syntax
BooleanType
Access
read-only
Table 11. Virtual Disk
SecuredThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskSecured
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.24
Description
Indicates whether the virtual disk is secured
or not.
Syntax
BooleanType
Access
read-only
Table 12. Virtual Disk
Is Cache CadeThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskIsCacheCade
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.25
Description
Indicates whether the virtual disk is being used
as a secondary cache by the controller.
Syntax
BooleanType
Access
read-only
Table 13. Virtual Disk
Cache PolicyThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskDiskCachePolicy
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.26
Description
The cache policy of the physical disks that are
part of this virtual disk. Possible values:
Enabled
Disabled
Default
Syntax
INTEGER
Access
read-only
Table 14. Virtual Disk
Operational StateThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskOperationalState
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.30
Description
The state of the virtual disk when there are progressive
operations ongoing. Possible values:
There is no active operation running.
The virtual disk configuration has
changed. The physical disks included in the virtual disk are being
modified to support the new configuration.
A Consistency Check (CC) is being performed
on the virtual disk.
The virtual disk is being initialized.
Back Ground Initialization (BGI)
is being performed on the virtual disk.
Syntax
INTEGER
Access
read-only
Table 15. Virtual Disk
ProgressThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskProgress
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.31
Description
The progress percentage of the operation that
is being performed on the virtual disk. This is applicable only if
there is a progressive operations ongoing.
Syntax
INTEGER
Access
read-only
Table 16. Virtual Disk
Available ProtocolsThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskAvailableProtocols
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.32
Description
List of protocols support by physical disks part
of this virtual disk. For e.g. SAS for Serial Attached SCSI or SATA
for Serial Advanced Technology Attachment.
Syntax
DisplayString
Access
read-only
Table 17. Virtual Disk
Media TypeThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskMediaType
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.33
Description
List of media types of the physical disks part
of this virtual disk. For e.g. HDD for Hard Disk Drive or SSD for
Solid State Device.
Syntax
DisplayString
Access
read-only
Table 18. Virtual Disk
Remaining RedundancyThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskRemainingRedundancy
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.34
Description
The number of physical disks which can be lost
before the virtual disk loses its redundancy.
Syntax
INTEGER
Access
read-only
Table 19. Virtual Disk
FQDDThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskFQDD
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.35
Description
The virtual disk's Fully Qualified Device Descriptor
(FQDD) as represented in Storage Management.
Syntax
FQDDString
Access
read-only
Table 20. Virtual Disk
Display NameThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskDisplayName
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.36
Description
The virtual disk's friendly FQDD as represented
in Storage Management.
Syntax
DisplayString
Access
read-only
Table 21. Virtual Disk
T10 PI StatusThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskT10PIStatus
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.37
Description
Indicates whether the virtual disk supports the
T10 PI (Protection Information). These protection fields are known
as DIF (Data Integrity Fields). Possible values:
Not one of the following.
Enabled.
Disabled.
Syntax
INTEGER
Access
read-only
Table 22. Virtual Disk
Block Size In BytesThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskBlockSizeInBytes
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.38
Description
The block size (in bytes) of the physical disk
part of the virtual disk. Possible values:
512
4096.
Syntax
INTEGER
Access
read-only
Table 23. Virtual Disk
Adapter 1 Access PolicyThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskAdapter1AccessPolicy
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.39
Description
Indicates the Access policy of the virtual disk
with the virtual adapters. Possible values:
No Access.
Full Access.
Syntax
INTEGER
Access
read-only
NOTE This attribute
is applicable for VRTX CMC only.
Table 24. Virtual Disk
Adapter 2 Access PolicyThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskAdapter2AccessPolicy
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.40
Description
Indicates the Access policy of the virtual disk
with the virtual adapters. Possible values:
No Access.
Full Access.
Syntax
INTEGER
Access
read-only
NOTE This attribute
is applicable for VRTX CMC only.
Table 25. Virtual Disk
Adapter 3 Access Policy The following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskAdapter3AccessPolicy
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.41
Description
Indicates the Access policy of the virtual disk
with the virtual adapters. Possible values:
No Access.
Full Access.
Syntax
INTEGER
Access
read-only
NOTE This attribute
is applicable for VRTX CMC only.
Table 26. Virtual Disk
Adapter 4 Access Policy The following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskAdapter4AccessPolicy
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.42
Description
Indicates the Access policy of the virtual disk
with the virtual adapters. Possible values:
No Access.
Full Access.
Syntax
INTEGER
Access
read-only
NOTE This attribute
is applicable for VRTX CMC only.
Table 27. Virtual Disk
Current Active Controller The following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskCurrentActiveController
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.43
Description
Indicates the Fully Qualified Device Descriptor
(FQDD) of the current active controller.
Syntax
FQDDString
Access
read-only
NOTE This attribute
is applicable for VRTX CMC only.
Table 28. Virtual Disk
Current Active Controller The following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskCurrentActiveController
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.43
Description
Indicates the Fully Qualified Device Descriptor
(FQDD) of the current active controller.
Syntax
FQDDString
Access
read-only
NOTE This attribute
is applicable for VRTX CMC only.
Table 29. Virtual Disk
Failover Controller The following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
virtualDiskFailoverController
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.140.1.1.44
Description
Indicates the Fully Qualified Device Descriptor
(FQDD) of the current active controller.
Syntax
FQDDString
Access
read-only
NOTE This attribute
is applicable for VRTX CMC only.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\