The objects provide information about the Controller
Table group in storage.
NOTE The Storage
Details Group is introduced in VRTX CMC from this release. The
iDRAC and CMC have the same Storage attributes with some modification
in CMC. The Object ID mentioned example: 1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.1 for the table group are attributes
for checking on iDRAC. To check the corresponding set of attributes
for VRTX CMC systems, use the Object ID example: 1.3.6.1.4.1.674.10892.2.6.1.20.130.1.1.1.
Table 1. Controller NumberThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerNumber
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.1
Description
Instance number of this controller entry.
Syntax
INTEGER
Access
read-only
Table 2. Controller NameThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerName
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.2
Description
The controller's name as represented in Storage
Management.
Syntax
DisplayString
Access
read-only
Table 3. Controller Rebuild
RateThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerRebuildRate
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.7
Description
The rebuild rate is the percentage of the controller's
resources dedicated to rebuilding a failed disk when a rebuild is
necessary.
Syntax
INTEGER
Access
read-only
Table 4. Controller FW
VersionThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerFWVersion
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.8
Description
The controller's current firmware version.
Syntax
DisplayString
Access
read-only
Table 5. Controller Cache
Size In MBThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerCacheSizeInMB
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.9
Description
The controller's current amount of cache memory
in megabytes.
Syntax
INTEGER
Access
read-only
Table 6. Controller Roll
Up StatusThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerRollUpStatus
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.37
Description
Severity of the controller state. This is the combined
status of the controller and its components.Possible values:
Other
Unknown
OK
Non-critical
Critical
Non-recoverable
Syntax
ObjectStatusEnum
Access
read-only
Table 7. Controller Component
StatusThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerComponentStatus
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.38
Description
The status of the controller itself without the
propagation of any contained component status. Possible values:
Other
Unknown
OK
Non-critical
Critical
Non-recoverable
Syntax
ObjectStatusEnum
Access
read-only
Table 8. Controller Driver
VersionThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerDriverVersion
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.41
Description
Currently installed driver version for this controller
on the host.
Syntax
DisplayString
Access
read-only
Table 9. Controller PCI
SlotThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerPCISlot
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.42
Description
The PCI slot on the server where the controller
is seated. This data is not reported for embedded or integrated controllers.
Syntax
DisplayString
Access
read-only
Table 10. Controller Reconstruct
RateThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerReconstructRate
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.48
Description
The reconstruct rate is the percentage of the
controller's resources dedicated to reconstructing a disk group after
adding a physical disk or changing the RAID level of a virtual disk
residing on the disk group.
Syntax
INTEGER
Access
read-only
Table 11. Controller Patrol
Read RateThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerPatrolReadRate
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.49
Description
The patrol read rate is the percentage of the
controller's resources dedicated to perform a patrol read on disks
participating in a virtual disk or hot spares.
Syntax
INTEGER
Access
read-only
Table 12. Controller BGI
RateThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerBGIRate
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.50
Description
The background initialization (BGI) rate is the
percentage of the controller's resources dedicated to performing the
background initialization of a redundant virtual disk after it is
created.
Syntax
INTEGER
Access
read-only
Table 13. Controller Check
Consistency RateThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerCheckConsistencyRate
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.51
Description
The check consistency rate is the percentage of
the controller's resources dedicated to performing a check consistency
on a redundant virtual disk.
Syntax
INTEGER
Access
read-only
Table 14. Controller Patrol
Read ModeThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerPatrolReadMode
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.52
Description
Identifies the patrol read mode setting for the
controller. Possible values:
Not one of the following or could
not be determined
Not Supported on this controller
Disabled
Automatic
Manual
Syntax
INTEGER
Access
read-only
Table 15. Controller Patrol
Read StateThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerPatrolReadState
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.53
Description
This property displays the current state of the
patrol read process. Possible values:
Not one of the following or could
not be determined
Patrol read is not running
Patrol read is running
Syntax
INTEGER
Access
read-only
Table 16. Controller Persistent
Hot SpareThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerPersistentHotSpare
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.59
Description
Indicates whether hot spare drives would be restored
on insertion into the same slot.
Syntax
BooleanType
Access
read-only
Table 17. Controller Spin
Down Unconfigured DrivesThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerSpinDownUnconfiguredDrives
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.60
Description
Indicates whether un-configured drives would be
put in power save mode by the controller.
Syntax
BooleanType
Access
read-only
Table 18. Controller Spin
Down Hot Spare DrivesThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerSpinDownHotSpareDrives
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.61
Description
Indicates whether hot spare drives would be put
in power save mode by the controller.
Syntax
BooleanType
Access
read-only
Table 19. Controller Spin
Down Time IntervalThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerSpinDownTimeInterval
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.62
Description
The duration in minutes after which, the unconfigured
or hot spare drives will be spun down to power save mode.
Syntax
INTEGER
Access
read-only
Table 20. Controller Preserved
CacheThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerPreservedCache
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.69
Description
Indicates whether preserved cache or pinned cache
is present on the controller.
Syntax
BooleanType
Access
read-only
Table 21. Controller Check
Consistency ModeThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerCheckConsistencyMode
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.70
Description
The current check consistency mode setting for
the controller. Possible values:
Not one of the following.
Not supported on this controller.
Normal check consistency operation.
Check consistency operation will
stop on encountering an error.
Syntax
INTEGER
Access
read-only
Table 22. Controller Copy
Back ModeThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerCopyBackMode
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.71
Description
The current copy back mode setting for the controller.
Possible values:
Not one of the following.
Not supported on this controller.
Disks assigned as spares could revert
back to spare status.
Data from physical disk participating
in a virtual disk could be automatically copied to the assigned hot
spare in case former has a predictive failure event.
Copyback mode is disabled
Syntax
INTEGER
Access
read-only
Table 23. Controller Security
StatusThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerSecurityStatus
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.72
Description
The controller's current security/encryption status.
Possible values:
The current status could not be determined.
Controller is not operating in an
encryption mode.
Controller is operating in the Local
Key Management (LKM) encryption mode.
Syntax
INTEGER
Access
read-only
Table 24. Controller Encryption
Key PresentThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerEncryptionKeyPresent
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.73
Description
Indicates whether encryption key is assigned for
the controller.
Syntax
BooleanType
Access
read-only
Table 25. Controller Encryption
CapabilityThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerEncryptionCapability
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.74
Description
The type of encryption supported by the controller.
Possible values:
Not one of the following.
No encryption supported.
Local Key Management.
Syntax
INTEGER
Access
read-only
Table 26. Controller Load
Balance SettingThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerLoadBalanceSetting
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.75
Description
The ability of the controller to automatically
use both controller ports (or connectors) connected to the same enclosure
in order to route I/O requests. Possible values:
Not one of the following.
Not supported.
Automatic load balancing is active.
Load balancing is inactive.
Syntax
INTEGER
Access
read-only
Table 27. Controller Max
Cap SpeedThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerMaxCapSpeed
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.76
Description
The maximum speed of the controller.in Gigbits
per second (Gbps). Possible values:
The speed could not be determined.
1.5 Gbps
3.0 Gbps
6.0 Gbps
12.0 Gbps
Syntax
INTEGER
Access
read-only
Table 28. Controller SAS
AddressThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerSASAddress
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.77
Description
The SAS address of the controller.
Syntax
DisplayString
Access
read-only
Table 29. Controller FQDDThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerFQDD
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.78
Description
The controller's Fully Qualified Device Descriptor
(FQDD) as represented in Storage Management.
Syntax
FQDDString
Access
read-only
Table 30. Controller Display
NameThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerDisplayName
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.79
Description
The controller's friendly FQDD as represented in
Storage Management.
Syntax
DisplayString
Access
read-only
Table 31. Controller T10
PI CapabilityThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerT10PICapability
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.80
Description
Description Indicates whether the controller
supports the T10 PI (Protection Information). These protection fields
are known as DIF (Data Integrity Fields).Possible values:
Not one of the following.
Capable of supporting T10 PI.
Not capable of supporting T10 PI.
Syntax
INTEGER
Access
read-only
Table 32. Controller RAID10
Uneven Spans SupportedThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerRAID10UnevenSpansSupported
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.81
Description
Indicates whether uneven spans for RAID 10 virtual
disk is supported on the controller.
Syntax
BooleanType
Access
read-only
Table 33. Controller Enhanced
Auto Import Foreign Config ModeThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerEnhancedAutoImportForeignConfigMode
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.82
Description
Indicates the status of enhanced auto-import of
foreign configuration property of the controller. Possible values:
Not one of the following.
Not Supported.
Disabled.
Enabled.
Syntax
INTEGER
Access
read-only
Table 34. Controller Boot
Mode SupportedThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerBootModeSupported
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.83
Description
Indicates whether headless boot mode settings are
supported on the controller.
Syntax
BooleanType
Access
read-only
Table 35. Controller Boot
ModeThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerBootMode
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.84
Description
Indicates the boot mode of the controller. Possible
values:
Not applicable for this controller.
User mode: User interaction required
for all boot messages (not applicable for uEFI environments).
Continue Boot On Error. User interaction
only required for critical messages.
Headless Mode Continue On Error. User
interaction is not required. Controller boot may halt on Error.
Headless Safe Mode. Controller shall
boot to safe mode on critical errors.
Syntax
INTEGER
Access
read-only
Table 36. Controller High
Availability ModeThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerHighAvailabilityMode
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.85
Description
Indicates the fault-tolerant mode of the controller.
Possible values:
None
Fault Tolerant(Active/Passive)
Fault Tolerant(Active/Active)
Degraded
Syntax
INTEGER
Access
read-only
NOTE This attribute
is applicable for VRTX CMC only.
Table 37. Controller Peer
ControllerThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
controllerPeerController
Object ID
1.3.6.1.4.1.674.10892.5.5.1.20.130.1.1.86
Description
The peer controller's Fully Qualified Device Descriptor
(FQDD) as represented in Storage Management.
Syntax
FQDDString
Access
read-only
NOTE This attribute
is applicable for VRTX CMC only.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\