The objects provide information about the Enclosure
Power Supply group in storage.
NOTE The Storage
Details Group is introduced in VRTX CMC from this release. The
iDRAC and CMC have the same Storage attributes with some modification
in CMC. The Object ID mentioned example: 1.3.6.1.4.1.674.10892.5.5.1.20.130.9.1.1 for the table group are attributes
for checking on iDRAC. To check the corresponding set of attributes
for VRTX CMC systems, use the Object ID example: 1.3.6.1.4.1.674.10892.2.6.1.20.130.9.1.1.
Table 1. Enclosure Power
Supply NumberThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosurePowerSupplyNumber
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.9.1.1
Description
Instance number of this power supply unit.
Syntax
INTEGER
Access
read-only
Table 2. Enclosure Power
Supply NameThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosurePowerSupplyName
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.9.1.2
Description
The power supply unit's name as represented in
Storage Management.
Syntax
DisplayString
Access
read-only
Table 3. Enclosure Power
Supply StateThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosurePowerSupplyState
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.9.1.4
Description
The current state of this power supply unit. Possible
states:
The current state could not be determined
The power supply unit is operating
normally
The power supply unit has encountered
a hardware problem or is not responding
The power supply unit is no longer
connected to the enclosure or there exists a problem communicating
to it
The power supply unit is unstable
Syntax
INTEGER
Access
read-only
Table 4. Enclosure Power
Supply Part NumberThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosurePowerSupplyPartNumber
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.9.1.7
Description
The part number of the power supply unit.
Syntax
DisplayString
Access
read-only
Table 5. Enclosure Power
Supply Component StatusThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosurePowerSupplyComponentStatus
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.9.1.9
Description
The status of the power supply unit itself without
the propagation of any contained component status. Possible values:
Other
Unknown
OK
Non-critical
Critical
Non-recoverable
Syntax
ObjectStatusEnum
Access
read-only
Table 6. Enclosure Power
Supply FQDDThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosurePowerSupplyFQDD
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.9.1.15
Description
The power supply unit's Fully Qualified Device
Descriptor (FQDD) as represented in Storage Management.
Syntax
FQDDString
Access
read-only
Table 7. Enclosure Power
Supply Display NameThe following table is described in the order of
name, object ID, description, syntax, and then the access level.
Name
enclosurePowerSupplyDisplayName
Object Id
1.3.6.1.4.1.674.10892.5.5.1.20.130.9.1.16
Description
The power supply unit's friendly FQDD as represented
in Storage Management.
Syntax
DisplayString
Access
read-only
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\