SNMP Reference Guide for iDRAC, Chassis Management Controller and OpenManage Enterprise - Modular Management Software 1.30.00

PDF

Chassis Information Group

The Chassis Information Group objects provide information about the modular chassis in which a blade system resides.

NOTE This Chassis information is only available for modular/blade systems. For Rack and Tower systems, the information is empty. Currently there is just one object under the Chassis Information Group.

Table 1. Chassis Service TagThe following table is described in the order of name, object ID, description, syntax, and then the access level.
Name	chassisServiceTag
Object ID	1.3.6.1.4.1.674.10892.5.1.2.1.0
Description	This attribute defines the service tag of the enclosing chassis.
Syntax	StringType
Access	Read-only

Table 2. Chassis Name ModularThe following table is described in the order of name, object ID, description, syntax, and then the access level.
Name	chassisNameModular
Object ID	1.3.6.1.4.1.674.10892.5.1.2.2.0
Description	This attribute defines the chassis name of the modular chassis. The value is zero length if not a modular system.
Syntax	StringType
Access	Read-only

Table 3. Chassis Model ModularThe following table is described in the order of name, object ID, description, syntax, and then the access level.
Name	chassisModelModular
Object ID	1.3.6.1.4.1.674.10892.5.1.2.3.0
Description	This attribute defines the model of the modular chassis. The value is zero length if not a modular system.
Syntax	StringType
Access	Read-only