Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Inspiron 24 5410 All-in-One Service Manual

Installing the base panel

Prerequisites

If you are replacing a component, remove the existing component before performing the installation procedure.

About this task

The following image indicates the location of the base panel and provides a visual representation of the installation procedure.

Image: Installing the base panel

Image: Installing the base panel

Steps

  1. Place the base panel in an upright position and align the screw holes on the base panel with the screw holes on the display-assembly base.
  2. Replace the 13 screws (M3x5) that secures the base panel to the display-assembly base.

Next steps

  1. Install the display panel.
  2. Install the antennas.
  3. Install the power-button board.
  4. Install the display hinges.
  5. Install the microphones.
  6. Install the system board.
  7. Install the media-card reader.
  8. Install the heat sink.
  9. Install the M.2 2230 solid-state drive or M.2 2280 solid-state drive, as applicable.
  10. Install the wireless card.
  11. Install the memory module.
  12. Install the retractable-camera assembly.
  13. Install the coin-cell battery.
  14. Install the fan.
  15. Install the speakers.
  16. Install the system-board shield.
  17. Install the hard drive.
  18. Install the I/O cover.
  19. Install the back cover.
  20. Install the stand.
  21. Follow the procedure in After working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\